Description
| ITEM | TECHNICAL DATA PL-HC MODEL |
| ELECTRIC REQUIREMENT | 480VAC / 3PH / 60HZ |
| POWER | ~ 114 KW |
| WEIGHT OF MACHINE | 45 tons |
| DIMENSION (L X W X H) | 128ft x 8.5ft x 6.6ft (39m x 2.6m x 2m) |
| FORMING SPEED | Max 120 feet/min (40 meters/min) (w/o punching) Lower with punching |
| PUNCHING CYCLE TIME | 0.5 second/time |
| ROLLER STATIONS | 28 |
| PROFILES | Stud (C profile), Track (U profile), Zee (Z profile), Eave Struts (G profile) |
| SIZE RANGE OF WEB | 4″ – 16″ (102 – 406 mm) |
| SIZE RANGE OF FLANGE | 2″ – 5″ (50 – 127 mm) |
| EAVE STRUTS ANGLE | 4:12 Pitch (18.5°) Max |
| MATERIAL THICKNESS | 1.5 – 3.5 mm (10 – 16Ga) |
| MATERIAL WIDTH | 7.8″ – 28″ (200 – 720 mm) |
| MATERIAL YIELD STRENGTH | G300 – G450 Mpa |
| LENGTH TOLERANCE | +-1mm |
| C TO Z CHANGING | Auto by Air motor and gearbox |
| C TO G CHANGING | Auto by Servo motor |
| SIZE CHANGING | Auto by Electric motor and gearbox |
| TRANSMISSION SYSTEM | Electric motor and gear box |
| CUTTING SYSTEM | By Hydraulic cylinder |
| CUTTING TECHNOLOGY | Including 2 cutting technologies: • Pre-cutting • Part-cutting |
| PUNCHING SYSTEM | By Hydraulic cylinder |
| PUNCHING TECHNOLOGY | • Punching system control to reach position by servo motor • All punching stations can setup to punching anywhere • 3 Punching system: ○ 1 Punching station A can move along 2 direction along the X and Y coordinate axes ○ 2 Punching station B can move in/out along the Y coordinate axes ○ 1 Punching station C can move 2 direction along X and Y coordinate axes • All punching stations can punch in 1 stop time |
| CONTROL SYSTEM | PC Control System |
